J. Ernesto Indacochea

Professor of Materials Science & Engineering

J. Ernesto Indacochea

Ph.D. Metallurgical Engineering (1982)
Colorado School of Mines

M.S. Metallurgical Engineering (1978)
Colorado School of Mines

M.S. Physics (1974)
Marquette University

B.S. Physics (1972)
Loyola University of Chicago

Contact Information

Office: 3075 ERF
Phone: 312-996-5283
Fax: 312-996-2426
E-mail: jeindaco@uic.edu
Faculty Profile
Publications
Personal Page

Research Interests

Joining and Welding Science; Surface Modification and Coatings; Corrosion and Materials Degradation; Materials Characterization and Failure Analysis; Advanced Non-Destructive Evaluation and Remaining Life Assessment of Structural Materials; New Materials Development for Fuel Cells.

Faculty Profile

Editorial Activities
. Associate Technical Editor, ASM Journal of Materials Engineering and Performance (2003-present);
. Associate Editor, ASME J. of Offshore Mechanics and Arctic Engineering (1996-2001);
. Associate Editor (Principal Reviewer), The Welding Journal, American Welding Society (1997- present);
. Board of review Member TMS/AIME Metallurgical and Materials Transactions, (1998 - present);
. Editorial Board of ASM- JMEP (2001- 2003);

. Peer reviewer: ASME J. of Materials Science & Engineering A, J. of Materials Research., J. of Materials Science, J. of the American Ceramic Society, ASME J. of Pressure Vessel Technolog y.

Awards

. Fellow of ASM International, 2003.
. "Professor Honoris Causa", Department of Materials Engineering, College of Engineering, Pontificia Universidad Catolica del Peru, June 20, 2002.
. Adams Memorial Award, American Welding Society, 2001.
. Visiting Research Scholar, Osaka University, Joining and Welding Research Institute, 2001.
. "Professor Honoris Causa" of Metallurgical and Materials Engineering, San Agustin University, Arequipa, Peru, 2000.
. Fellowship of the German Research Society, Aachen University of Technology/ Materials Science Institute; Aachen, Germany. 1994.

Publications

Recent Books

Proceedings of the International Conference on Joining of Advanced and Specialty Materials V. ASM-International Materials Solution 2003. Eds. J.E. Indacochea, J.N. DuPont , T.J. Lienert, W. Tillmann, N. Sobczak, W.F. Gale, and M. Singh, Columbus, OH. October 7-10 (2002).

Proceedings of the International Conference on Joining of Advanced and Specialty Materials IV. ASM-International Materials Solution 2002. Eds. J.E. Indacochea, J.N. DuPont , T.J. Lienert, W. Tillmann, and . M. Singh, Indianapolis, IN. November 5-8 (2001).

Proceedings of the International Conference on Joining of Advanced and Specialty Materials III, ASM-International Materials Solution 2001. Eds. M. Singh, J.E. Indacochea, J.N. DuPont , T.J. Lienert, St. Louis, MO, October 8-12 (2000).

Proceedings of the International Conference on Joining of Advanced and Specialty Materials II, ASM-International Materials Solution '99. Eds. M. Singh, J.E. Indacochea, K. Ikeuchi, J. Martinez, and J.N. DuPont , Cincinnati, OH, November 1-4 (1999).

Proceedings of the International Conference on Joining of Advanced and Specialty Materials, ASM-International Materials Solution '98. Eds. M. Singh, J.E. Indacochea and D. Hauser. Rosemont, IL, October 12-15 (1998).

Joining of Advanced Engineered Materials. J. E. Indacochea, Ed. Conference Proc. InterUniversity Research Workshop. University of Illinois at Chicago, Chicago, IL, June 26-27, 1996.

Selected Publications

A. Polar, J.E. Indacochea, M.L. Wang, V. Singh, and G. Lloyd, "Measurement and Microstructural Evaluation of Creep - Induced Changes in Magnetic Properties of a 410 Stainless Steel". ASME J. of Engineering Materials and Technology. Accepted, December 2003.

G. Lloyd, V. Singh, M.L Wang, and J.E. Indacochea. "Simulation of Surface Heating Effects and Effective Permeabilities Using a Jiles/Atherton Model". IEEE Transactions on Magnetics. Accepted, December 2003.

Liming Ke, Li Xing, and J.E. Indacochea, "Material Flow Patterns and Cavity Model in Friction Stir Welding of Aluminum Alloys". Metallurgical and Materials Transactions. In Press. (2003).

J.E. Indacochea, "Joining and Processing in Engineering Ceramics to Metallic Materials, in Biomorphic SiC Ceramics, and in Bioactive & Bioinert Ceramics". Materials Science Forum, Vol. 439, pp. 23-29 (2003).

S.M. McDeavitt , G.W. Billings, and J.E. Indacochea, "High-Temperature Interaction Behavior at Liquid Metal-Ceramic Interfaces", ASM Journal of Materials Engineering and Performance. Vol. 11, No. 4, pp. 392-401 (2002).

S.M. McDeavitt , G.W. Billings, and J.E. Indacochea, "Interfacial reactions of zirconium and zirconium-alloy liquid metals with beryllia at elevated temperatures". J. Materials Science, Vol. 37, pp. 3765-3776 (2002).

J.E. Indacochea, S.M. McDeavitt and G.W. Billings, "Elevated Temperature Interactions of Dissimilar Materials", Journal of Advanced Engineering Materials, Vol. 3, No. 112, pp. 895-901 (2001).

J.E. Indacochea, J.L. Smith, K.R. Litko, E.J. Karell, and A. Raraz, "High-Temperature Oxidation and Corrosion of Structural Materials in Molten Chlorides". J. of Oxidation of Metals, Vol. 55, No. 1/2, pp. 1-16 (2001).

D. Wojnowski, Y. K. Oh and J. E. Indacochea. "Metallurgical Assessment of the Softened HAZ Region during Multipass Welding". ASME J. of Manufacturing Science & Engineering, Vol. 122, pp. 310-315 (2000).

J.E. Indacochea, G. Wang, R. Seshadri, and Y.K. Oh, "Creep Rupture Properties of High-Temperature Bainitic Steels After Weld Repair", ASME J. Engineering Materials and Technology, Vol. 122, pp. 259-263 (2000).

J.E. Indacochea, J.L. Smith, K.R. Litko, and E.J. Karrel. "Corrosion Performance of Ferrous and Refractory Metals in Molten Salts Under Reducing Conditions" J. Materials Research, Vol. 14, No. 5, pp. 1990-1995 (1999).

V. Trehan, J.E. Indacochea, M.Singh, E. Lugscheider, and I. Buschke, "Silicon Carbide Brazing and Joint Characterization", J. Mechanical Behavior of Materials, Vol. 10, pp. 341-352 (1999).

Y.K. Oh, G.S. Kim, and J.E. Indacochea, "Creep Rupture Behavior due to Molybdenum Rich M6C Carbide in 1.0Cr-1.0Mo-0.25V Bainitic Steel Weldment", Scripta Materialia, Vol. 41, pp. 7-12 (1999).

V. Trehan, S. Trickey, J.E. Indacochea, W. Tillmann, I. Buschke, and E. Lugscheider, "Brazing of Silicon Nitride with Reactive Filler Metals", J. Science and Engineering of Composite Materials, Vol. 8, No. 2, pp. 107-112 (1999).

J.E. Indacochea, I. Bloom, M. Krumpelt and T. Benjamin. "A Comparison of Two Aluminizing Methods for Corrosion Protection in the Wet Seal of Molten carbonate Fuel Cells". J. Materials Research, Vol. 13, No. 7, pp. 1834-1839 (1998).

W. Tillmann, E. Lugscheider, K. Schlimback, C. Manter and J.E. Indacochea. "A Heat-Resistant Active Brazing of Silicon Nitride-- Part 2: Metallurgical Characterization of the Braze Joint". Welding Journal, Vol. 77, No. 3, pp. 103s-109s (1998).

W. Tillmann, E. Lugscheider, K. Schlimback, C. Manter and J.E. Indacochea. A Heat-Resistant Active Brazing of Silicon Nitride-- Part 1: Mechanical Evaluation of Braze Joints. Welding Journal, Vol. 76, No. 8, pp.300s-304s (1997).

J.E. Indacochea and R. Seshadri. "An Analysis of Creep Damage in a Welded Low Alloy Steel Rotor". ASME J. Materials Science & Engineering, Vol. A234-236, pp. 555-558, (1997).

Y.K. Oh and J.E. Indacochea. "Effect of HAZ Softening on Creep Rupture Properties of 1.0Cr-1.0Mo-0.25V Turbine Rotor Steels - Part I: Creep Rupture Life". Welding Journal of the Korean Welding Society, Vol. 15, No. 2, pp. 47-55 (1997).

Y.K. Oh and J.E. Indacochea. "Effect of HAZ Softening on Creep Rupture Properties of 1.0Cr-1.0Mo-0.25V Turbine Rotor Steels - Part II: Carbide Morphology". Welding Journal of the Korean Welding Society, Vol. 15, No. 2, pp. 56-63 (1997).

 
Copyright 2014 The Board of Trustees
of the University of Illinois.
Contact the webmaster
WISEST
Helping Women Faculty Advance
Funded by NSF